World Steel

EN 1.0114 Material (S235J0 Steel) The S235J0 steel (1.0114 material) is an unalloyed carbon steel steel grade according to EN 10025-2. Steel S235J0 meaning "S" stands for structural steel; "235" means the minimum yield strength (MPa) for the steel...

S235J2 Steel (1.0117 Material) The S235J2 steel (1.0117 material) is an non-alloy carbon steel steel grade in accordance with EN 10025-2. Steel S235J2 Meaning "S" stands for structural steel; "235" means the minimum yield strength (MPa) for the steel...

EN 10025-2 S235 Steel EN 10025-2 S235 steel is a non-alloy carbon structural steel grade, according to EN 10025-2, S235 material is devided into 3 quality grades: S235JR (1.0038) - Impact energy ≥ 27 Joules at room temperature...

EN 1.4404 Stainless Steel (X2CrNiMo17-12-2) EN 1.4404 material (stainless steel X2CrNiMo17-12-2) is a low-carbon version of 1.4401 (X5CrNiMo17-12-2), the maximum carbon content is only 0.03%, while 1.4401 is 0.07% maximum, so the weldability and corrosion resistance of 1.4404...

Introduction SAE AISI 1018 steel is one of the commonly used low carbon steels. It is usually used as carburized steel. Since most of the 1018 carbon steel is produced by cold drawing, this cold rolled steel is...

SUS304 Stainless Steel Introduction SUS304 material is a Japanese JIS Standard and one of the most commonly used stainless steels, containing 18% Cr and 8% Ni. It can maintain good strength and heat resistance in high temperature and...

Introduction SAE AISI 1095 steel is one of the most widely used 10 series steels, with good performance and low cost, with appropriate toughness and wear resistance, but poor corrosion resistance. Applications AISI SAE 1095 carbon steel can be made...

Introduction AISI 4130 steel (UNS G41300), also known as 4130 Chromoly steel, is a chrome-molybdenum series low alloy steel with high strength, toughness and hardenability, usually used in quenched and tempered condition. Uses AISI SAE 4130 alloy steel can be...

SAE AISI 4140 Alloy Steel SAE 4140 (AISI 4140 steel) is a Cr-Mo series (Chrome molybdenum series) low alloy steel, this material has high strength and hardenability, good toughness, small deformation during quenching, high creep strength and long-lasting...

EN 1.4571 Material (X6CrNiMoTi17-12-2 Stainless Steel) DIN EN 1.4571 material (X6CrNiMoTi17-12-2) is made by adding titanium (Ti) to EN 1.4401 stainless steel (X5CrNiMo17-12-2) to improve the resistance to intergranular corrosion. Titanium can improve the corrosion resistance of stainless...